Our Facilities
In April of 2019, we completed the move to our state of the art headquarters facility, which was renovated to our specifications specifically for plastic fabrication. Careful consideration was given to the layout of the building to make your projects run more efficiently and therefore less costly. With a total of 107,000 square feet, we have one of the largest single plastic fabrication facilities in the US.
- (2) 10 Ton Overhead Cranes with 24’ clear to hook
- (2) One Ton Jib Cranes with 20 Foot Swing
- (1) 10 Ton Cranes in fab area
- (2) 5 Ton Crane in fab area
- Redundant Regenerative Blowers Feeding Clean Dry Air to 30 Welding Locations Throughout the Facility
- Ingersoll-Rand RSN30 Rotary Screw Air Compressor providing 175 CFM@125 psi.
- 20' X 20' Doors to Move Large Projects Out of Building
- 107,000 Square Feet of Manufacturing Space
Capabilities
- Hot Gas Welding of All Thermoplastics
- Extrusion Welding of All Thermoplastics
- CNC Butt Welding Up To 2-1/2" Thick
- CNC Panel Saw Cutting Up To 6" Thick
- CNC Routing to 60" x 144" with 4th Axis to 8" Diameter
- CNC Milling and Turning of Thermoplastics
- Conventional Bending, Forming, Routing, Drilling, etc
- Pipe and Manifold Fabrication
- Pump Skid and Process Skid Fabrication
- Installation and Maintenance
- In-House Wiring and Electrical for The Products We Supply
- In-House Metal Fabrication for Supports, Skids, Stands, etc
- MIG and TIG Welding
- Custom Fabrication
Butt Welders
Wegener 6-40 CNC Controlled Butt-Welder
- THE LARGEST PLASTIC BUTT WELDER IN THE WESTERN HEMISPHERE
- Welds Flush Butt Welds to 1-1/2" Thick X 20' Long
- Makes 90 Degree Angle Welds to 1-1/2" Thick
- Cold Rolling of Cylinders up to 1-1/4" Wall
- Welds Flush Butt Welds to 2-1/2" Thick X 13' Long
- Makes 90 Degree Angle Welds to 2" Thick
- Cold Rolling of Cylinders up to 1-1/4" Wall
Wegener KSM 155 CNC Controlled Butt Welder
- Welds up to 1” thick X 48” long
- Auto-trims of weld flash
- Welds Flush Butt Welds to 1" Thick X 48" Long
- Welds Flush Butt Welds to 1" Thick X 120" Long
CNC Equipment
Hurco VMX50i Vertical Machining Center
- 50 x 26 travel with 24” Z
- 10” 4th Axis indexer
- 30 Position tool changer
- 16” dia x 60” long capacity
- 4” though spindle size
- Live tooling for milling and cross holes
- Secondary sub spindle for back side machining
- 16” dia x 36” long capacity
- 4” through sprindle
- Live tooling for milling and cross holes
- Secondary sub spindle for back side machining
- 14 Foot Die Length
- Shears/Notches 1" Steel Bar
- Shears/Punches 1/2" Steel Plate
- 60" X 144" Travel
- 8" 4th Axis Rotary Indexer
- Carriage Mounted Tool Changer
- 60” x 120” travel
- High Speed 2000 IPM rapid rates
- 60" X 144" Travel
- Fixed 4th Axis Aggregate Tooling
- Up to 63 mm capacity PP and PVDF
- Up to 4" capacity PP, HDPE and PVDF
- 6" Thick Capacity X 14'
- 60" X 96" X 84" Envelope
Additional Support Equipment
- (45) Wegener Auto-Therm Hot Gas Welders
- (10) Various Wegener Extrusion Welders
- Miller Millermatic 350P Mig Welder
- Esab Warrior 500i Mig Welder
- Hobart Easy Tig 165 Welder
- Heat Bending Tables up to 10 Feet Long
- Manual Table Saws, Band Saws, Routers, Drill Presses
- Portable equipment to facilitate installations
Let’s Get Started
Contact Our Team Today To Get Started
Would you like to get additional information or are unsure on how to get started?
